Six months a weaver (farewell 2015)

Well, it’s been a busy first 6 months of weaving! I’ve made a lot of scarfs, done a few samples and even branched out to things like a hand-towel.

So, here is my half-year as a weaver in pictures… lots of pictures…

Continue reading Six months a weaver (farewell 2015)

Advertisements

I wove a tube!

In fact I wove a couple of tubes. It may be my new obsession. It’s an awful lot of double weave fun!

So this was the first tube…

Two images of a woven tube

So, what creates the tube-y magic? Well, it’s pretty simple; you weave the top layer, then the bottom layer, then the top layer and finish with the bottom layer again. Basically you weave a circle. This creates a join on both edges and voila, a tube.

I will get into more detail about this in another post, but for now I’m just thinking of all the things I can do with tubes!

Getting started with double weave

What happens after you put a second heddle on a rigid heddle loom? The double weave calls to you!

Double weave is one of the more literally named techniques in that you weave two layers of cloth at the same time. Yes, you read that right – two layers of cloth!an image of a woven shuttle holder

Now, if you’re scratching your head and going “why is that exciting?” then consider this; it means you can double the width of the cloth your loom creates, and it means you can weave tubes or weave open and closed sections (pockets) like in this example of a shuttle holder from the Ashford’s double heddle instructions.

The thing about double weave is that it can sound really complicated when you read the instructions, but it’s not. What I found most useful for getting my head around it was when I saw an image like this:

Image of two open sheds on the loom showing the two layers one above the other

The bottom shed is black and the top shed is purple and I’ve got both of them open so you can see how one sits above the other. When you weave you weave one set of threads at a time.

image of two layer of cloth being woven separately on one threading
The open edge of double-wide cloth

So, if you want to create a double-width fabric you use one shuttle and weave top layer / top layer / bottom layer / bottom layer. the u shape you get when creating double width clothThis means your weft joins the two layers together on just one side.

To weave a tube, you change the order to be top layer / bottom layer / top layer / bottom layer and your weft will join both edges.

You can weave two separate layers of cloth, by using two separate shuttles. To create pockets like in the picture above, you alternate two separate layers of cloth with sections where you treat your two heddles as one, to get a single layer of very dense cloth.

So, how does this magic happen? Each reed/heddle controls one layer of cloth, but you need 4 shafts (equivalent of an up-shed and a down-shed for each layer of the cloth) and that’s the reason for the pick-up sticks in the image of my loom.

You need to move the slot threads with pick-up sticks. This is because you need to get the slot threads for the layer you’re weaving away from the slot threads of the other layer, remembering on an RH loom only the threads in the holes actually move.

Obviously, on a multi-shaft loom you would just thread 4 shafts.

I’d say the only tricky bit of double weave is the threading, because you have to get the right threads in the front and back holes. And it’s easy to make mistakes. You can see here I crossed a bunch of my threads and this will stop you getting a shed.

image of crossed threads between the two reeds/heddles

I realise this post probably does make it sound complicated, but honestly, once you do it you’ll find it’s not really!